Commercial Flat Roofs is a local distributor in Mississauga, Ontario for Zonda Tools. Please contact us to obtain more information and pricing.
Diablo – Hot Air Welder
- An industrial-grade machine at a reasonable price.
- High wattage, heavily weighted machine will produce quality welds on thicker material at faster speeds.
- High volume, high-pressure brushless welding torch delivers up to 540 litres of hot air per minute.
- Front-wheel slides into welding/transport position.
- High quality, accurate digital speed, and temperature control.
- Visual seam guide.
- Perfect for large, commercial jobs.
Model Number | ZTR-D500 |
---|---|
Power | 230V, 4600W, 20A 50/60Hz |
Welding Speed | 1-33ft/min, 1-10m/min (adjustable) |
Air Temp | 68-1150ºF, 20-620ºC (adjustable) |
Seam Width | 1.5in, 40mm |
Weight | 82lbs, 37kg (with weights) |
Digital Display | Temperature and Speed |
Material | PVC, TPO, Single Ply Roofing Membrane |
Sirocco – Hot Air Welder
- Front wheels are adjustable from side to side to avoid sheet fasteners, walls and roof jacks.
- Front wheels are large and fixed (not casters) to stabilize and help the machine run straight.
- Drive wheel articulates to keep machine flat on uneven roof surfaces. It is also adjustable to keep the machine welding in a straight line.
- High volume, high pressure brushless welding torch delivers up to 540 litres of hot air per minute.
- Welds Edge Metal and can weld as close as 3 inches to the wall.
- Lighter than the Diablo at 65lbs.
Model Number | ZTR-S400 |
---|---|
Power | 230V, 4200W, 18.2A 50Hz |
Welding Speed | 1-25ft/min, 1-7.6m/min (adjustable) |
Air Temp | 68-1150ºF, 20-620ºC (adjustable) |
Seam Width | 1.5in, 40mm |
Weight | 65lbs, 29.5kg (with weights) |
Digital Display | Temperature and Speed |
Material | PVC, TPO, Edge Metal, Single Ply Roofing Membrane |
Calima Plus – Hot Air Welder
- Low cost, high performance welder.
- Available in 230 or 120 volt models. Can be used with 120v, 20amp household current.
- Accurate digital display for speed and temperature control.
- High volume, high pressure brushless welding torch delivers up to 540 litres of hot air per minute.
- Welds five times faster than hand welding.
- Small footprint for ease of handling.
- Easily welds Edge Metal.
- Laser light seam guide.
- 1 1/2″ weld seam width.
Model Number | ZTR-C300 |
---|---|
Power | 230V, 2600W, 11.3A 50/60Hz or 120V, 2000W, 16.6A 50/60Hz |
Welding Speed | 1-39ft/min, 1-12m/min (adjustable) |
Air Temp | 68-1150ºF, 20-620ºC (adjustable) |
Seam Width | 1.5in, 40mm |
Weight | 28lbs, 12.5kg (with weights) |
Digital Display | Temperature and Speed |
Material | PVC, TPO, Edge Metal, Single Ply Roofing Membrane |
Calenta Drive – Hot Air Welder
- Very maneuverable to weld in tight areas.
- Great for doing boots and details.
- Motor driven for more consistent seams.
- Welds edge metal.
- Adjustable, high temperature output.
- Photoeye temperature control.
- High air flow rate at 180 litres per minute.
- Overheating protection.
- Built for heavy duty industrial use.
Model Number | ZTR-C200 |
---|---|
Power | 230V, 1700W, 7.4A 50/60Hz or 120V, 1700W, 14.2A 50/60Hz |
Welding Speed | 1-16ft/min, 0.5-5m/min (adjustable) |
Air Temp | 68-1150ºF, 20-620ºC (adjustable) |
Air Volume | 180L/min |
Seam Width | 1.5in, 40mm |
Weight | 11lbs, 5 kg |
Material | PVC, TPO, Single Ply Roofing Membrane |
Calenta – Hot Air Tool
- Adjustable, high temperature output.
- Photoeye temperature control.
- High air flow rate at 180 litres per minute.
- Overheating protection.
- No roll grip.
- Built for heavy duty industrial use.
Model Number | ZTR-C100 |
---|---|
Power | 230V, 1600W, 7A 50/60Hz or 120V, 1600W, 13.3A 50/60Hz |
Air Temp | 68-1200ºF, 20-650ºC (adjustable) |
Air Volume | 180L/min |
Noise | ≤65db |
Weight | 2.5lbs, 1.05kg |
Digital Display | Temperature and Speed |
Material | PVC, TPO, Single Ply Roofing Membrane |
1 Year Machine Replacement Guarantee
All of our machines are backed by a 1 year complete machine* replacement warranty. In the unlikely case that the machine breaks and becomes non operational we will repair it or replace it with a brand new machine.
-
The guarantee only applies to the original owner with proof of purchase.
-
Machines that have been misused or ignored safe operation requirements will be exempt.
-
If the machine cannot be repaired in a timely manor it will be replaced.
-
When available loaner machines will be sent while repairs are taking place.
-
Our main goal is to provide excellent service, not just at the time of sale, but for the life of the product.
2 Year Parts And Labor Warranty
Every machine* also carries a 2 year parts and labor warranty. We are confident in our products ability to last and deliver quality welds in the toughest work environments again and again.
-
The warranty only applies to the original owner with proof of purchase.
-
We will replace, free of charge, any faulty mechanical or electronic elements.
-
This warranty does not cover any wear parts such as: carbon brushes, heat elements, rubber air dam, silicon tires, motor chain, etc.
* The term “Machine” includes all hot air welders and wedge welders. Accessories shipped with our machines or purchased separately such as cases, nozzles, adjustment tools, etc are not included.
Contact Us About Your Next Roofing Project
At CommercialFlatRoofs.ca, we specialize in providing durable, high-performance roofing solutions for residential, commercial, and industrial properties. Our expert team works with top-quality materials to ensure your flat roof stands the test of time. Reach out today for a free, no-obligation quote and let us help you with your roofing needs.
For Sales and Support
Please call or email us:
COMMERCIAL FLAT ROOFS
6810 KITIMAT ROAD, UNIT# 5
MISSISSAUGA, ONTARIO L5N 5M2
Tel: 647-933-ROOF (7663)
E-mail: andrew@commercialflatroofs.ca
Hours of Operation: Moday – Friday: 9am – 5pm
www.zondatools.com